组合使用关键词、标准类型、状态与 ICS 分类，快速定位所需国家标准。
找到 70,494 条
GB/T 2351-2005
Fluid power systems and components-Connectors and associated components-Nominal outside diameters of tubes and nominal inside diameters of hoses
GB/T 14043-2005
Hydraulic fluid power-Code for identification of valve mounting surfaces and cartridge valve cavities
GB/T 7682-2005
Types and basic parameters for the milk separator
GB/T 10939-2005
Rotary mowers—Types and basic parameters
GB/T 10940-2005
Reciprocating mowers—Types and basic parameters
GB/T 1973.3-2005
Small cylindrically coiled compression spring—Dimensions and parameters
GB/T 1973.2-2005
Small cylindrically coiled tension spring—Dimensions and parameters
GB/T 1475-2005
Gallium
GB/T 19831.1-2005
Petroleum and natural gas industries-Casing centralizers-Part 1:Bow-spring casing centralizers
GB/T 8014.3-2005
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method
GB/T 8014.1-2005
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 1:The measuring principle
GB/T 8753.3-2005
Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 3:Admittance test
GB/T 8753.1-2005
Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 1:Phosphoric acid/chromic acid test without nitric acid predip
GB/T 8014.2-2005
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part2:Mass-loss method
GB/T 8753.4-2005
Anodizing of aluminium and aluminium alloys-assessment of quality of sealed anodic oxide coatings Part 4:Dye spot test with prior acid treatment
GB/T 19832-2005
Petroleum and natural gas industries-Drilling and production equipment-Inspection,maintenance,repair and remanufacture of hoisting equipment
GB/T 8753.2-2005
Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 2:Phosphoric acid/chromic acid test with nitric acid predip
GB/T 7998-2005
Test method for intergranular corrosion of aluminium alloy
GB/T 19829.2-2005
Petroleum and natural gas industries-Life cycle costing-Part 2:Guidance on application of methodology and calculation methods
GB/T 19829.1-2005
Petroleum and natural gas industries-Life cycle costing-Part 1:Methodology
